Dell PowerEdge 4300 Dell PowerEdge 4300 Systems Service Manual - Page 61
Lift the cover away from the chassis.
View all Dell PowerEdge 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
keylock computer cover To remove the computer cover, follow these steps: 1. Turn the keylock on the back edge of the cover clockwise to the unlocked position (see Figure 4-1). 2. Slide the cover a half-inch (about a centimeter) or so toward the back of the computer, and grasp the top of the cover at both ends. 3. Lift the cover away from the chassis. To replace the cover, make sure the keylock is in the unlocked position. Fit the cover over the side rail at the bottom of the chassis and slide it closed. Removing and Replacing Parts 4-3
Removing and Replacing Parts
4-3
&RPSXWHU±&RYHU
)LJXUH±·´²³±±&RPSXWHU±&RYHU±5HPRYDO
To remove the computer cover, follow these steps:
1.
Turn the keylock on the back edge of the cover clockwise to the unlocked
position (see Figure 4-1).
2.
Slide the cover a half-inch (about a centimeter) or so toward the back of the
computer, and grasp the top of the cover at both ends.
3.
Lift the cover away from the chassis.
To replace the cover, make sure the keylock is in the unlocked position. Fit the
cover over the side rail at the bottom of the chassis and slide it closed.
computer cover
keylock