Dell PowerEdge C4140 EMC Installation and Service Manual - Page 105
Installing the custom GPU brackets on the replacement GPUs
View all Dell PowerEdge C4140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Figure 73. Installing the GPU switch board Next steps 1. Connect the GPU switch board power cable. 2. Installing a GPU on page 108 3. Connect the GPU signal cables to the switch board and the system board. 4. Follow the procedure listed in After working inside your system on page 58. Installing the custom GPU brackets on the replacement GPUs Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 57. 2. Keep the Phillips #1 and #2 screwdrivers ready. 3. Install the GPU brackets on the GPU removed from your system. Steps 1. Align the screw holes on the front I/O bracket with the screw holes on the GPU. 2. Secure the I/O bracket to the GPU by using the screws. 3. Align the screw holes on the support bracket with the screw holes on the GPU. 4. Secure the support bracket to the GPU by using the screws. PowerEdge C4140 installing and removing system components 105