Dell PowerEdge C4140 EMC Installation and Service Manual - Page 106
Installing the GPU brackets on the GPUs removed from your system
![]() |
View all Dell PowerEdge C4140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Figure 74. Installing the custom GPU I/O brackets and the support brackets 1. Torx screw (2) 3. GPU 5. screw (5) 2. support bracket 4. I/O bracket Next steps Follow the procedure listed in After working inside your system on page 58. Installing the GPU brackets on the GPUs removed from your system Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 57. 2. Keep the Phillips #1, #2, and the Torx T6 screwdrivers ready. 3. Remove the GPU brackets. Steps 1. Align the screw holes on the front I/O bracket with the screw holes on the GPU. 2. Secure the I/O bracket to the GPU by using the screws. 3. Align the screw holes on the support bracket with the screw holes on the GPU. 4. Secure the support bracket to the GPU by using the screws. 106 PowerEdge C4140 installing and removing system components
![](/manual_guide/products/dell-poweredge-c4140-emc-installation-service-manual-9ffb8d4/106.png)