Dell PowerEdge C4140 EMC Installation and Service Manual - Page 44
Network Settings screen details, Integrated Devices, Viewing Integrated Devices, Option, Description
![]() |
View all Dell PowerEdge C4140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart your system and try again. 3. On the System Setup Main Menu screen, click System BIOS. 4. On the System BIOS screen, click Network Settings. Network Settings screen details The Network Settings screen details are explained as follows: About this task Option Description UEFI PXE Settings Options Description PXE Device n (n = Enables or disables the device. When enabled, a UEFI PXE boot option is created for the 1 to 4) device. PXE Device n Settings(n = 1 to 4) UEFI HTTP Settings Enables you to control the configuration of the PXE device. Options HTTP Device (n = 1 to 4) Description Enables or disables the device. When enabled, a UEFI HTTP boot option is created for the device. HTTP Device n Settings (n = 1 to 4) UEFI iSCSI Settings Enables you to control the configuration of the HTTP device. Enables you to control the configuration of the iSCSI device. Table 29. UEFI iSCSI Settings screen details Option iSCSI Initiator Name Description Specifies the name of the iSCSI initiator in IQN format. iSCSI Device1 Enables or disables the iSCSI device. When disabled, a UEFI boot option is created for the iSCSI device automatically. This is set to by default. iSCSI Device1 Settings Enables you to control the configuration of the iSCSI device. TLS Authentication Configuration View and/or modify this device's boot TLS authentication mode. None means the HTTP server and the client will not authenticate each other for this boot. One way means the HTTP server will be authenticated by the client, while the client will not be authenticated by the server. This option is set to None by default. Integrated Devices You can use the Integrated Devices screen to view and configure the settings of all integrated devices including the video controller, integrated RAID controller, and the USB ports. Viewing Integrated Devices To view the Integrated Devices screen, perform the following steps: Steps 1. Power on, or restart your system. 44 Pre-operating system management applications
![](/manual_guide/products/dell-poweredge-c4140-emc-installation-service-manual-9ffb8d4/44.png)