Dell PowerEdge R750 EMC Installation and Service Manual - Page 170
Optional IDSDM module, Removing the IDSDM module
![]() |
View all Dell PowerEdge R750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Next steps 1. Install the air shroud or install the GPU air shroud. 2. Follow the procedure listed in After working inside your system. Optional IDSDM module Removing the IDSDM module Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. 3. If you are replacing the IDSDM module, remove the MicroSD cards. NOTE: Temporarily label each SD card with its corresponding slot number before removal. Reinstall the SD cards into the corresponding slots. Steps Holding the blue pull tab, lift the IDSDM module out of the system. Figure 171. Removing the IDSDM module Next steps 1. Replace the IDSDM module. Installing the IDSDM module Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in Before working inside your system. 170 Installing and removing system components
![](/manual_guide/products/dell-poweredge-r750-emc-installation-service-manual-5386569/170.png)