Dell PowerEdge R750 EMC Installation and Service Manual - Page 191
Removing a power supply unit adapter, Prerequisites, Steps, Next steps
View all Dell PowerEdge R750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Removing a power supply unit adapter Remove the PSU adapter, when installing PSU with 86 mm wide form factor. Prerequisites Follow the safety guidelines listed in the Safety instructions. Steps Using a Phillips #1 screwdriver, loosen the screw and remove the power supply unit adapter. Figure 199. Removing a power supply unit adapter Next steps 1. Replace the PSU adapter or Install the PSU. Installing a power supply unit adapter Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. If required, Remove the PSU. NOTE: Remove the PSU adapter, when installing PSU with 86 mm wide form factor. Steps 1. Align and insert the power supply unit adapter. 2. Using a phillips #1 screwdriver, tighten the screw. Installing and removing system components 191