Dell PowerEdge R750 EMC Installation and Service Manual - Page 201
Installing the LOM card and rear I/O board, Installing the liquid cooling
![]() |
View all Dell PowerEdge R750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
NOTE: The procedure to install the liquid cooling rear I/O board and rear I/O boards is same. Steps 1. Align the connectors and slots on the LOM card or rear I/O board with the connector and standoffs on the system board. 2. Press the LOM card or rear I/O board until firmly seated on the system board connector. 3. Using a Phillips #2 screwdriver, secure the LOM card or rear I/O board to the system board with screws. Figure 208. Installing the LOM card and rear I/O board Figure 209. Installing the liquid cooling rear I/O board Next steps 1. Install the system board. 2. Follow the procedure listed in After working inside your system. Installing and removing system components 201
![](/manual_guide/products/dell-poweredge-r750-emc-installation-service-manual-5386569/201.png)
NOTE:
The procedure to install the liquid cooling rear I/O board and rear I/O boards is same.
Steps
1.
Align the connectors and slots on the LOM card or rear I/O board with the connector and standoffs on the system board.
2.
Press the LOM card or rear I/O board until firmly seated on the system board connector.
3.
Using a Phillips #2 screwdriver, secure the LOM card or rear I/O board to the system board with screws.
Figure 208. Installing the LOM card and rear I/O board
Figure 209. Installing the liquid cooling rear I/O board
Next steps
1.
Install the system board
.
2.
Follow the procedure listed in
After working inside your system
.
Installing and removing system components
201