Dell PowerEdge R750 EMC Installation and Service Manual - Page 46
Removing the rear drive module air shroud, Installing the GPU shroud filler
![]() |
View all Dell PowerEdge R750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Figure 38. Installing the GPU shroud filler Next steps 1. If required, install the full length expansion card risers. 2. Installing the GPU air shroud top cover. 3. Follow the procedure listed in After working inside your system. Removing the rear drive module air shroud Prerequisites CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in shutdown of the system and loss of data. 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in Before working inside your system. Steps Press the edges on either side of the rear drive module air shroud, and lift the rear drive module air shroud out of the rear drive module. 46 Installing and removing system components
![](/manual_guide/products/dell-poweredge-r750-emc-installation-service-manual-5386569/46.png)