Dell PowerEdge R750 EMC Installation and Service Manual - Page 55
Drives, Removing a drive blank
![]() |
View all Dell PowerEdge R750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
4. Follow the procedure listed in the After working inside your system. Drives Removing a drive blank Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. If installed, remove the front bezel. CAUTION: To maintain proper system cooling, drive blanks must be installed in all empty drive slots. Steps Press the release button, and slide the drive blank out of the drive slot. Figure 49. Removing a drive blank Next steps 1. Replace the drive blank. Installing a drive blank Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. If installed, remove the front bezel. Steps Slide the drive blank into the drive slot until the release button clicks into place. Installing and removing system components 55
![](/manual_guide/products/dell-poweredge-r750-emc-installation-service-manual-5386569/55.png)