Dell PowerEdge R750 EMC Installation and Service Manual - Page 40
Removing the GPU air shroud, Installing the air shroud
![]() |
View all Dell PowerEdge R750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2. Lower the air shroud into the system until it is firmly seated. Figure 32. Installing the air shroud Next steps 1. Follow the procedure listed in After working inside your system. Removing the GPU air shroud Prerequisites CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in shutdown of the system and loss of data. 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in Before working inside your system. 3. Remove the full length expansion card risers. Steps Hold the edges of the GPU air shroud, and lift the air shroud out of the system. 40 Installing and removing system components
![](/manual_guide/products/dell-poweredge-r750-emc-installation-service-manual-5386569/40.png)
2.
Lower the air shroud into the system until it is firmly seated.
Figure 32. Installing the air shroud
Next steps
1.
Follow the procedure listed in
After working inside your system
.
Removing the GPU air shroud
Prerequisites
CAUTION:
Never operate your system with the air shroud removed. The system may get overheated quickly,
resulting in shutdown of the system and loss of data.
1.
Follow the safety guidelines listed in the
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
3.
Remove the full length expansion card risers
.
Steps
Hold the edges of the GPU air shroud, and lift the air shroud out of the system.
40
Installing and removing system components