Dell PowerEdge R750 EMC Installation and Service Manual - Page 207
BOSS S2 module kit
View all Dell PowerEdge R750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
• Internal USB card kit • Serial COM port kit • VGA port kit BOSS S2 module kit The BOSS S2 module supports up to two M.2 SSDs. NOTE: To enable the BOSS S2 module in the system, ensure that the BIOS firmware version is 1.5.5 and iDRAC firmware version is 4.30.30.30 or later. Before you begin the installation or removal process, follow the safety guidelines and before working inside the system instructions. Table 66. BOSS S2 module kit components R750 (quantity) NA 1 1 1 1 1 or 2* 1 or 2* 2 2 1 1 Components in kit BOSS cover M3 x 0.05 x 4.5 mm screws BOSS signal cable BOSS power cable BOSS-S2 module BOSS-S2 card carrier M.2 SSD M.2 240 GB information label M.2 480 GB information label BOSS card filler Tech sheet To remove the BOSS blank : 1. Power off the system and remove the system cover. 2. Use a screwdriver to push out the blank from the BOSS S2 module bay. Upgrade Kits 207