Dell XPS Gen 2 Owner's Manual - Page 75

Installing Memory, Grasp the module and pull up.

Get Dell XPS Gen 2 PDF manuals and user guides View all Dell XPS Gen 2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

Installing Memory CAUTION: Before you begin any of the procedures in this section, follow the safety instructions on page 9. 1 Follow the instructions in "Before You Begin" on page 68. 2 Open the computer cover (see page 70). 3 Lay the computer on its side so that the system board is on the bottom of the inside of the computer. 4 If necessary, remove a memory module: a Press out the securing clip at each end of the memory module connector. b Grasp the module and pull up. If the module is difficult to remove, gently ease the module back and forth to remove it from the connector. 5 To insert a module, press out the securing clip at each end of the memory module connector. memory connector closest to processor securing clips (2) connector Removing and Installing Parts 75

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
Removing and Installing Parts
75
Installing Memory
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions on
page 9.
1
Follow the instructions in "Before You Begin" on page 68.
2
Open the computer cover (see page 70).
3
Lay the computer on its side so that the system board is on the bottom of the inside of the
computer.
4
If necessary, remove a memory module:
a
Press out the securing clip at each end of the memory module connector.
b
Grasp the module and pull up.
If the module is difficult to remove, gently ease the module back and forth to remove it
from the connector.
5
To insert a module, press out the securing clip at each end of the memory module connector.
securing clips (2)
connector
memory connector closest
to processor