Dell XPS Gen 2 Owner's Manual - Page 93
Processor, Installing the Processor
View all Dell XPS Gen 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Processor CAUTION: Before you perform this procedure, follow the safety instructions on page 9. Installing the Processor NOTE: It is recommended that only a technically knowledgeable person perform this procedure. CAUTION: The processor can get very hot during normal operation. Ensure that the processor has had sufficient time to cool before you touch it. 1 Follow the instructions in "Before You Begin" on page 68. 2 Open the computer cover (see page 70). 3 Remove the processor airflow shroud (see page 91). If you are replacing a processor, follow steps 4, 5, and 6 in "Removing the Processor" on page 95. NOTICE: You must position the processor correctly in the socket to avoid permanent damage to the processor and the computer. 4 If the release lever is not extended to the release position, move it to that position. 5 Align pin-1 (the imprinted corner) of the processor and pin-1 of the socket. NOTICE: Processor pins are delicate. To avoid damage, ensure that the processor aligns properly with the socket, and do not use excessive force when you install the processor. 6 Carefully set the processor in the socket and press it down lightly to seat it. 7 Rotate the release lever back toward the system board until it snaps into place, securing the processor. Removing and Installing Parts 93