Dell XPS Gen 2 Owner's Manual - Page 86
Installing a Floppy Drive
View all Dell XPS Gen 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
www.dell.com | support.dell.com floppy-drive cable power cable tabs (2) floppy drive 4 Press inward on the two tabs on the sides of the drive, slide the drive upward, and remove it from the floppy-drive bay. Installing a Floppy Drive 1 Follow the instructions in "Before You Begin" on page 68. 2 Open the computer cover (see page 70). 3 If you are replacing a drive and the new drive does not have the bracket rails attached, remove the rails from the old drive by removing the two screws that secure each rail to the drive. Attach the bracket to the new drive by aligning the screw holes on the drive with the screw holes on the bracket rails and then inserting and tightening all four screws (two screws on each rail). See the diagram on page 83. 4 Gently slide the drive into place until the tabs securely click into position. 86 Removing and Installing Parts