Dell XPS Gen 2 Owner's Manual - Page 81
Installing an AGP Card, Drives, Overview
View all Dell XPS Gen 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Installing an AGP Card 1 Follow the instructions in "Before You Begin" on page 68. 2 Open the computer cover (see page 70). 3 Press the lever on the card retention arm and raise the retention arm. retention arm AGP card lever edge connector AGP connector PCI connector 4 Gently press the card into the AGP connector until it clicks into place, ensuring that the tab fits into the notch on the front end of the card. 5 Lower the retention arm and press it into place, securing the card(s) in the computer. 6 Close the computer cover (see page 102). 7 Connect the monitor cable to the card's video connector. NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer. 8 Connect your computer and devices to electrical outlets, and turn them on. Drives Overview Your computer supports one floppy drive and a combination of up to four of the following: • Either two IDE hard drives or two Serial ATA hard drives. • Two CD or DVD drives. Removing and Installing Parts 81