Epson ActionPrinter 5000 User Manual - Page 21
Setting Up, Printer, the same way as you install the ribbon cartridge. However,
View all Epson ActionPrinter 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Assembling the Printer 6. Replace the paper-tension unit by placing it on the printer's mounting pegs; then lower the front of the unit into place. Press on the front of both sides of the paper-tension unit until you feel it click into place. 7. Replace the printer cover by first inserting the front tabs into the slots on the printer; then lower it into place. Note: You install the optional #7768 or #7770 film ribbons in the same way as you install the ribbon cartridge. However, you should follow the guidelines below when using a film ribbon: l Print on ordinary paper only. l Move the paper-thickness lever to the next lowest position. 1-8 Setting Up the Printer
Assembling the Printer
6. Replace the paper-tension unit by placing it
on
the printer’s
mounting pegs; then lower the front of the unit into place. Press
on the front of both sides of the paper-tension unit until you
feel it click into place.
7. Replace the printer cover by first inserting the front tabs into
the slots on the printer; then lower it into place.
Note: You install the optional #7768 or #7770 film ribbons in
the same way as you install the ribbon cartridge. However, you
should follow the guidelines below when using a film ribbon:
l
Print on ordinary paper only.
l
Move the paper-thickness lever to the next lowest position.
1-8
Setting Up
the
Printer