Epson ActionPrinter 5000 User Manual - Page 51
Multi-part forms, You can use multi-part forms of up to four parts including
View all Epson ActionPrinter 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Printing on Special Paper Paper Type Ordinary paper (with film ribbon) Thin paper Ordinary paper (single sheets or continuous) Multi-part forms (carbonless) 2 sheets (original + 1 copy) 3 sheets (original + 2 copies) 4 sheets (original + 3 copies) Labels Envelopes Lever Position -1 -1 or0 0 1 2 2 to 3 2 2 to 5 Note: Print speed is reduced for paper-thickness lever settings of 2 and above. Multi-part forms Your printer can print on both single-sheet and continuous multipart forms. You can load single-sheet multi-part forms only in the front paper slot. You can use multi-part forms of up to four parts (including the original). Make sure you set the paper-thickness lever to the proper position. Use only carbonless multi-part forms. You load multi-part forms the same way as you load single sheets or continuous paper. For best results with continuous multi-part forms, it is recommended you use the tractor installed in the pushtractor position together with the optional pull tractor. For details, see Using Single Sheets or Loading continuous paper with the pull tractor earlier in this chapter. Pay special attention to setting the loading position as described in Using micro-feed in Chapter 3. 2-24 Paper Handling