Epson ActionPrinter 5000 User Manual - Page 67
Adjusting the loading position
View all Epson ActionPrinter 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Micro Feed Adjusting the loading position The loading position is the position of the paper after it has been automatically loaded by the printer. If printing is too high or low on the page, change the loading position with the micro-feed feature as follows: 1. Make sure the printer is turned on. 2. Load either continuous or single-sheet paper. (Load continuous paper by pressing the LOAD/EJECT button.) The MULTI-PART light begins to blink. Note: You can adjust the loading position only while the MULTIPART light is blinking. 3. While holding down the ALT button, press the LOAD/EJECT button to adjust the loading position to a lower position on the page; press the LF/FF button to adjust the loading position to a higher position on the page. The MULTI-PART light stops blinking after a short time. 3-14 Using the Printer