Epson ActionPrinter 5000 User Manual - Page 80
Loading paper with the single-bin cut-sheet feeder
View all Epson ActionPrinter 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Cut-Sheet Feeders 3. Make sure the paper-release lever is in the single-sheet position. 4. Hold the cut-sheet feeder in both hands and press back on the latch levers on each side. Fit the notches in the cut-sheet feeder over the mounting posts on the printer. Release the latch levers and lower the cut-sheet feeder until it rests on the printer. 5. Replace the printer cover. You are now ready to load paper with your cut-sheet feeder. Removing a cut-sheet feeder is the reverse of the steps above. Loading paper with the single-bin cut-sheet feeder Load paper using the single-bin cut-sheet feeder as follows: 1. Turn off the printer. Remove the paper guide, if necessary. Using Printer Options 4-3
Cut-Sheet Feeders
3.
Make sure the paper-release lever is in the single-sheet position.
4.
Hold the cut-sheet feeder in both hands and press back on the
latch levers on each side. Fit the notches in the cut-sheet feeder
over the mounting posts on the printer. Release the latch levers
and lower the cut-sheet feeder until it rests on the printer.
5. Replace the printer cover.
You are now ready to load paper with your cut-sheet feeder.
Removing a cut-sheet feeder is the reverse of the steps above.
Loading paper with the single-bin cut-sheet feeder
Load paper using the single-bin cut-sheet feeder as follows:
1. Turn off the printer. Remove the paper guide, if necessary.
Using Printer Options
4-3