Epson ActionPrinter 5000 User Manual - Page 25
PAUSE, the LOAD/EJECT, CAUTION, Setting Up, Printer
View all Epson ActionPrinter 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Testing the Printer CAUTION: Run the self test using paper at least 210 mm (8.2 inches) wide for the ActionPrinter 5000 or 360 mm (14 inches) wide for the ActionPrinter 5500; otherwise, the print head prints directly on the platen. 4. Insert a sheet of paper between the edge guides until it meets resistance. After a few seconds, the printer loads the paper to the loading position and begins printing the self test. 5. To stop the self test, press the PAUSE button (you can resume the self test by pressing the PAUSE button again). 6. Press the LOAD/EJECT button to eject the paper from the printer and then turn the printer off. Note: If test results are not satisfactory, see Chapter 6. Here is part of a typical self test. Roman 0123456789:;?@ABCDEFGHIJKL 0123456789:;?@ABCDEFGHIJKLM 0123456789:;?@ABCDEFGHIJKLMN 0123456789:;?@ABCDEFGHIJKLMNO 0 1 2 3 4 5 6 7 8 9 : ; ?@ABCDEFGHIJKLMNOP 1-12 Setting Up the Printer