Epson ActionPrinter 5000 User Manual - Page 36
Using Continuous Paper, Tractor position and available paper paths, Paper Handling 2-9
View all Epson ActionPrinter 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Using Continuous Paper You can print on continuous paper from 101 mm (4 inches) to 254 mm (10 inches) wide on the ActionPrinter 5000 and from 101 m m (4 inches) to 406 mm (16 inches) wide on the ActionPrinter 5500. You can feed continuous paper from the rear, front, or bottom. Your printer comes with the tractor installed in the push-tractor position, for feeding paper from the rear. If this is your paperfeeding method, skip to page 2-12. To feed paper from the front or bottom, you must install the tractor in the pull-tractor position. You can also install an optional pull tractor and use both the push and pull tractors together. Tractor position and available paper paths Below are the various ways of feeding continuous paper. Always move the paper-release lever to the position indicated for the paperfeeding method you are using. Tractor position Paper-release lever position Paper-feeding method Push-tractor position Pull-tractor position Make sure you align your paper supply with the paper loaded in the tractor so the paper feeds smoothly into the printer. If you want to feed paper through the bottom paper slot, use a printer stand that has a large enough opening for paper to feed from the bottom without obstruction. Paper Handling 2-9