Epson ActionPrinter 5000 User Manual - Page 93
The C823051/C823061 serial interface card, to 1 MARK to indicate that it cannot receive data. - error codes
View all Epson ActionPrinter 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Interface Cards The C823051/C823061 serial interface card To use the C823051/C823061 interface card, see the sections below on selecting a baud rate, handshake timing, and error handling. For all other data transfer conventions, such as word structure and communications protocol, see the C823051/C823061 interface card manual. Selecting a baud rate You can select from the following baud rates: 150, 300, 600, 1,200, 2,400, 4,800, 9,600, and 19,200 bps (bits per second). When you set the baud rate, see the bit-rate selection table in the C823051/C823061 interface card manual. Handshake timing When the vacant area for data in the input buffer drops to 256 bytes, the printer outputs an X-OFF code or sets the DTR flag to 1 (MARK) to indicate that it cannot receive data. When the vacant area for data in the buffer increases to 528 bytes, the printer outputs an X-ON code or sets the DTR flag to 0 (SPACE) to indicate that it is ready to receive data. Error handling When the printer detects a parity error, it prints an asterisk (*). The printer ignores all other errors, including framing and overrun errors. 4-16 Using Printer Options