Epson R200 Service Manual - Page 16
Table 1-6., Check Points for Paper Out Error to Each Phenomenon - parts
![]() |
UPC - 010343849532
View all Epson R200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
EPSON Stylus Photo R200/R210 Revision A Occurrence Timing Position of CR Phenomenon Detail Table 1-6. Check Points for Paper Out Error to Each Phenomenon Faulty Part/ Part Name Check Point 1. Check if "Roller, Retard Assy." operates properly while feeding paper. Remedy 1. Reassemble "Extension Spring, 0.45" located the under side of "Roller, Retard Assy.". When feeding paper, the leading edge of paper is detected properly, but the paper is ejected without being set at the print start position. ASF Assy. At operation - "PF Motor" and "Spur Gear, 37.242" rotate properly, but "Holder, Shaft, LD Roller" does not feed paper. (The driving of "PF Motor" is not transmitted to "Holder, Shaft, LD Roller".) Holder, Shaft, LD Roller 1. Check if "Extension Spring,0.143" in "Clutch Mechanism" has not come off. 2. Check if "Clutch" has not come off from the dowel of "Shaft, LD Roller". 3. Check if "Clutch Tooth" is not damaged. Extension Spring, 0.143 Clutch Tooth Dowel of "Holder, Shaft, LD Roller" 4. Check if "Clutch" is not damaged. Paper Guide, Upper (Only HP side) 1. Check if "Paper Guide, Upper" (only HP side) has not come off from "Main Frame". Extension Spring, 0.45 1. Reassemble "Extension Spring, 0.143" in "Clutch Mechanism". 2. Reassemble the round portion of "Clutch" on the dowel of "Shaft, LD Roller". 3. Replace "Holder, Shaft, LD Roller" with a new one. 4. Replace "Holder, Shaft, LD Roller" with a new one. 1. Reassemble "Paper Guide, Upper" to "Main Frame". TROUBLESHOOTING Unit Level Troubleshooting 16
![](/manual_guide/products/epson-r200-service-manual-1506266/16.png)