Epson R200 Service Manual - Page 21
Table 1-8., Check Points for CD/DVD Guide Error to Each Phenomenon
![]() |
UPC - 010343849532
View all Epson R200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
EPSON Stylus Photo R200/R210 Revision A Occurrence Timing Position of CR Table 1-8. Check Points for CD/DVD Guide Error to Each Phenomenon Phenomenon Detail Faulty Part/ Part Name Check Point 1. Check if the contact point of "Housing, Middle" with "Star Wheel/CDR Sensor" is not cracked. Remedy 1. Replace "Housing, Middle" with a new one. Housing, Middle Contact point At power-on At HP An error occurs even if "CDR Guide Assy." is closed when turning on the power. 1. Check if "Star Wheel/CDR Sensor" is connected to CN11 1. Connect "Star Wheel/CDR Sensor" to CN11 on "Main Board". on "Main Board". Star Wheel/CDR Sensor Star Wheel/ CDR Sensor Main Board 2. Check if "Star Wheel/CDR Sensor" is not damaged. 3. Check if "Star Wheel/CDR Sensor" cable is not cut off. 1. Check if any device on "Main Board" is not damaged. 2. Replace "Star Wheel/CDR Sensor" with a new one. 3. Replace "Star Wheel/CDR Sensor" with a new one. 1. Replace "Main Board" with a new one. TROUBLESHOOTING Unit Level Troubleshooting 21
![](/manual_guide/products/epson-r200-service-manual-1506266/21.png)