Epson R200 Service Manual - Page 41
Make sure that Paper Return Lever and Roller, Retard
![]() |
UPC - 010343849532
View all Epson R200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
EPSON Stylus Photo R200/R210 Revision A o When reassembling "ASF Unit", n Make sure that "Extension Spring, 0.45" is hooked on "Frame, ASF" and "Roller, Retard Assy.". n Make sure that "Torsion Spring, 6.45" is correctly installed on "Paper Return Lever" and "Frame, ASF". A D JU S TM E N T R E Q U IR E D o When having replaced "ASF Unit", apply G-46 grease to the specified points in adequate dose. (Refer to Chapter 4 "MAINTENANCE") o When having replaced or removed "ASF Unit", implement the adjustment in the following order. (Refer to Chapter 3 "ADJUSTMENT") 1. First Dot Adjustment Torsion Spring, 6.45 Figure 2-7. "Torsion Spring, 6.45" removal n Make sure that "Paper Return Lever" and "Roller, Retard Assy." move smoothly. n Do not touch the cork of "Hopper". o When reinstalling "ASF Unit", n Install "Compression Spring, 2.51" on "Hopper", then check if "Hopper" moves smoothly. n Screw in the order as shown in the figure. n Make sure that there is no gap between "ASF Unit" and "Frame, Main". DISASSEMBLY AND ASSEMBLY Disassembly 41
![](/manual_guide/products/epson-r200-service-manual-1506266/41.png)