Epson R200 Service Manual - Page 28
Holder, Shaft, LD Roller with a new - stylus photo drivers
![]() |
UPC - 010343849532
View all Epson R200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
EPSON Stylus Photo R200/R210 Occurrence Timing Position of CR Phenomenon Detail One or more than one traces of "Star Wheels" appear in a direction perpendicular to "Carriage Unit" movement. Revision A Table 1-13. Check Points for Defective Print Quality Faulty Part/ Part Name Frame EJ Assy. Check Point Remedy 1. Check if "Star Wheels" have not come off. 2. Check if the surface of "Frame EJ Assy." is mounted horizontally. 1. Check if "Roller EJ Assy." has not come off from "Printer Mechanism". 1. Reassemble "Star Wheels" correctly. 2. Replace "Frame EJ Assy." with a new one. 1. Reassemble "Roller EJ Assy." correctly. Roller EJ Assy. At operation - Normal printing task is performed; however, the top margin is less than usual. Holder, Shaft, LD Roller 1. Check if any paper dust has not adhered to the surface of "LD Roller". 1. Remove the dust by using a soft bruch or soft cloth moistened with alcohol. * If the problem is not solved, replace "Holder, Shaft, LD Roller" with a new one. LD Roller The print is light and thin. Printer Driver and 1. Check if appropriate paper is used in accordance with the 1. Use the appropriate type of paper in Special Paper Printer Driver settings. accordance with the Printer Driver settings. Print Head 1. Check if the correct Head ID has been input in EEPROM 1. Input 15-digit ID code of the Head ID in by using the Adjustment Program. EEPROM by using the Adjustment Program TROUBLESHOOTING Unit Level Troubleshooting 28
![](/manual_guide/products/epson-r200-service-manual-1506266/28.png)