Epson R200 Service Manual - Page 22
Table 1-9., Check Points for CD/DVD Tray Error to Each Phenomenon - stylus photo cd printing
UPC - 010343849532
View all Epson R200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
EPSON Stylus Photo R200/R210 Revision A Occurrence Timing Position of CR Phenomenon Detail Table 1-9. Check Points for CD/DVD Tray Error to Each Phenomenon Faulty Part/ Part Name Check Point 1. Check if the contact point of "CDR Tray" with "CDR Tray Sensor" is not cracked. Remedy 1. Replace "CDR Tray" with a new one. CDR Tray When printing CDR/DVDR - An error occurs even though "CDR Tray" is set when printing CDR/DVDR. Contact point 1. Check if "CDR Tray Sensor" is connected to CN11 on "Main Board". 1. Connect "CDR Tray Sensor" to CN11 on "Main Board". CDR Tray Sensor CDR Tray Sensor Main Board 2. Check if "CDR Tray Sensor" is not damaged. 2. Replace "CDR Tray Sensor" with a new one. 3. Check if "CDR Tray Sensor Connector Cable" is not cut off. 1. Check if any device on "Main Board" is not damaged. 3. Replace "CDR Tray Sensor" with a new one. 1. Replace "Main Board" with a new one. TROUBLESHOOTING Unit Level Troubleshooting 22