Epson R200 Service Manual - Page 29

EPSON Stylus Photo R200/R210 Occurrence Timing Position of CR Phenomenon Detail At operation - The paper is stained with the ink. The upper edge of the paper gets creased. Revision A Table 1-13. Check Points for Defective Print Quality Faulty Part/ Part Name Check Point Frame EJ Assy. 1. Check if there is any ink adhesion on "Frame EJ Assy.". 1. Check if "Frame EJ Assy." has not warped upward. Paper Guide, Front 1. Check if there is any ink adhesion on "Paper Guide, Front". 2. Check if "porous pad" of "Paper Guide, Front" has not come off. Roller EJ Assy. 1. Check if there is any ink adhesion on "Roller EJ Assy.". Paper Guide, Upper 1. Check if there is any ink adhesion on "Paper Guide, Upper". Remedy 1. Clean the ink adhesion on "Frame EJ Assy." with a soft cloth. 1. Replace "Frame EJ Assy." with a new one. 1. Clean the ink adhesion on "Paper Guide, Front" with a soft cloth. 2. Reattach "porous pad". 1. Clean the ink adhesion on "Roller EJ Assy." with a soft cloth. 1. Clean the ink adhesion on "Paper Guide, Upper" with a soft cloth. PF Roller Ink System Print Head ASF Assy. 1. Check if there is any ink adhesion on "PF Roller". 1. Clean the ink adhesion on "PF Roller" with a soft cloth. 1. Check if the wiping operation has been performed correctly. 1. Replace "Ink System" with a new one. 1. Check if there is any ink adhesion on "Print Head Cover". 1. Clean the ink adhesion on "Print Head Cover" with a soft cloth. 1. Check if "Hopper Pad" is stuck to "Hopper" correctly. 1. Replace "ASF Assy." with a new one. TROUBLESHOOTING Unit Level Troubleshooting 29