Epson R200 Service Manual - Page 66
Do not let Lever, Change, Combination Gear, 27.2
UPC - 010343849532
View all Epson R200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
EPSON Stylus Photo R200/R210 n Set all of the gears on the shaft of "Pump Frame" correctly, and then check if they move smoothly. n Make sure that the ink tube is not squashed or pressed. n Install the ink tube to the grooves (x2) at the bottom surface of "Cap Frame". Figure 2-44. Installation point for the ink tube o When reinstalling "Ink System" n Check if "Pump Assy." is correctly secured. n Do not let "Lever, Change", "Combination Gear, 27.2, 19.2", "Spur Gear, 27.2" and "Combination Gear, 20.82, 24" drop and break them. DISASSEMBLY AND ASSEMBLY Disassembly Revision A 66
EPSON Stylus Photo R200/R210
Revision A
DISASSEMBLY AND ASSEMBLY
Disassembly
66
²
Set all of the gears on the shaft of "Pump Frame" correctly,
and then check if they move smoothly.
²
Make sure that the ink tube is not squashed or pressed.
²
Install the ink tube to the grooves (x2) at the bottom surface
of "Cap Frame".
Figure 2-44.
Installation point for the ink tube
±
When reinstalling "Ink System"
²
Check if "Pump Assy." is correctly secured.
²
Do not let "Lever, Change", "Combination Gear, 27.2,
19.2", "Spur Gear, 27.2" and "Combination Gear, 20.82,
24" drop and break them.