Epson R200 Service Manual - Page 51

EPSON Stylus Photo R200/R210 2.3.11 Carriage Unit removal o External View Dowel Carriage Unit Cover, Guide Plate, CR Hooks Fixed Spring, CR Shaft, Left Hook 2 3 Rib 6 Guide Plate, CR C.B.S 3x6 (7-9kgf•cm) 1 4 Rib 5 Revision A o Parts/Units which should be removed before removing "Carriage Unit" Paper Support Assy./Housing (left/right)/Housing (frame)/APG Unit/Print Head o Disassembly Procedure 1. Remove the screw (x7) for securing "Guide Plate, CR". 2. Remove "Fixed Spring, CR Shaft, Left" by releasing it from the hook of "Frame, Main". 3. Release the ribs (x2) for securing "Guide Plate, CR", and remove "Guide Plate, CR" while stepping aside the hook which has secured "Fixed Spring, CR Shaft, Left". 4. Remove the right side of "CR Scale" from "Holder, Scale Right". 5. Pull out "CR Scale" from the back of "Carriage Unit" to the left. Then, release "CR Scale" from one of two hooks of "Holder, Scale, Left" first, and next release "Extension Spring, 3.289" from the other hook. 6. Remove "Extension Spring, 3.289" from "CR Scale". 7. Loosen the tension of "Timing Belt" by pushing "Pulley, Driven" to the right. Then, remove "Timing Belt" from the pinion gear of "CR Motor" first, and then from "Pulley, Driven". Hook Holder, Scale Left Hook CR Scale Holder, Scale Right Hook Extension Spring, 3.289 Pulley, Driven Timing Belt Figure 2-22. "Carriage Unit" removal (1) Pinion Gear DISASSEMBLY AND ASSEMBLY Disassembly 51