Epson SureColor T3270 User Manual - Page 141
Advanced Settings, Roll Paper Tension
View all Epson SureColor T3270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Epson SureColor T-Series User's Guide Using the Control Panel Menu Item Roll Switch Condition*1 Paper Type Description Type Match* Disable Paper Length Print Length* Remaining Amount Disable Paper Width Best Fit* Width Match Disable Print Job Priority*3 Roll In Use In Order* From the following options, select the condition under which to switch to another roll for printing when the current roll has run out. O Type Match: Switch to the other roll for printing only when the paper type specified in the job and the paper type of the other roll are the same. If a different type of paper has been loaded on the other roll, an error appears, and the printer cannot print. O Disable: Print even when the paper type is different. From the following options, select the conditions when you want to switch in consideration of roll paper remaining and print length (length of one page of a print job). Note that if Roll Paper Remaining is Off in the Paper menu, this setting is disabled regardless of its configuration. O Print Length: If both Roll 1 and Roll 2 have enough paper remaining for the print length, print using the roll with the lower remaining amount. If the remaining amount of one roll is shorter than the print length, print using the other roll. O Remaining Amount: Print using the roll with the lower remaining amount regardless of the print length. O Disable: Print using the roll currently in use regardless of the remaining amount or print length. From the following options, select the conditions when you want to use the roll paper that reduces print margins in consideration of roll paper width and print job length (the value of Document Size of the printer driver). O Best Fit: Compare the roll width of Roll 1 and Roll 2 and the width of the print job, and then print using the roll with the smaller print margin. O Width Match: Print using the roll with a width that matches the width of the print job. O Disable: Print using the roll currently in use regardless of the roll paper width or print job width. Select the print job priority when there are several waiting jobs: print jobs that can be printed by the roll currently in use, switch to another roll, and then print the remaining jobs (Roll In Use) / Print jobs in the order they were received (In Order). When the setting is In Order, automatic roll switching operations may be frequent depending on the settings of the print jobs, and this may increase the overall print time. Advanced Settings Item Roll Paper Tension Description 1 to 5 (3*) This setting is used if one of the following settings are configured to Extra High: Paper menu > Custom Paper Setting > Roll Paper Tension or Printer driver's Paper Configuration > Roll Paper Tension. If wrinkles are formed on the paper during printing when the abovementioned Roll Paper Tension is High, set it to Extra High, and then configure the strength of the tension using this setting. Higher values produce higher tension. 141