Epson SureColor T3270 User Manual - Page 169
Job Cancel, Settings, Print only, Hard Disk Unit, Paper Size Check, Resume All Jobs, Messages
View all Epson SureColor T3270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Epson SureColor T-Series User's Guide Problem Solver Messages Take-Up Error Is anything obstructing the take-up reel sensor system? HDD Error HDD used for another printer needs to be formatted. Continue? Storage Error Check if hard disk unit is correctly installed. Paper Cut Error Remove uncut paper. Data Size Error Data size of print job is too large. Check on print job. HDD Store Error Hard disk does not have enough space. See documentation for how to delete stored print jobs. HDD Boot Error Hard disk error. Hard disk cannot be used. Copy Error Can not start copy with this printer setting. Refer to manual for details. Scanner Error Refer to manual for details. Held Jobs Limit Held job queue full. What to do After checking the take-up reel unit sensor and removing any obstructions, press the Z button. If there is loose paper around the take-up reel unit roll core, set the Auto switch to Off and keep the Manual pressed in the take-up direction to remove the slack. After confirming that the paper is correctly attached, return the Auto switch to its original position and press the Z button. U"Using the Auto Take-up Reel Unit (T7270 Only)" on page 51 Optional hard disk units and Adobe PostScript 3 Expansion Units that have been connected to other devices must be formatted after being connected to this printer. The disk can not be used until it is formatted. To format the disk, use the Setup menu in the control panel. U"Setup menu" on page 139 Press the W button and select Job Cancel to stop printing. Remove and then reconnect the optional hard disk unit or Adobe PostScript 3 Expansion Unit. If this message appears on the LCD panel again, contact your dealer or Epson Support. When you are printing via the printer driver included with a printer, you can print regardless of the hard disk status if you select the Advanced tab in the printer driver, open the Settings dialog box of Hard Disk Unit, and select Print only. When the Adobe PostScript 3 Expansion Unit is connected, you cannot print via the PS driver. After pressing the Z button, pull out the paper and cut along the line of the failed cut using scissors or a third-party cutter. Pull the edge of the paper straight outside the printer. The optional hard disk unit or Adobe PostScript 3 Expansion Unit can store print jobs up to 100 GB in size. To print larger jobs, select the Advanced tab in the printer driver, open the Settings dialog box of Hard Disk Unit, and select Print only; alternatively, ensure that print jobs are less than 100 GB in size. Unwanted jobs can be deleted in Remote Manager or the LFP HDD Utility. U"Saving to and Reprinting on the Optional Hard Disk Unit" on page 67 Press the Z button to clear the error from the control panel. When you are printing via the printer driver included with the printer, you can print regardless of the hard disk unit status when you select Print only in the Settings dialog box of Hard Disk Unit. When the Adobe PostScript 3 Expansion Unit is connected, you cannot print via the PS driver. If this message appears on the LCD panel again, contact your dealer or Epson Support. The printer will be unable determine the size of the current paper and make enlarged copies when Off is selected for Paper Size Check in the Setup menu. In the Setup menu, set Paper Size Check to On, and then reload the paper. U"Setup menu" on page 139 O Release the A3/A4 scanner transportation lock and turn the printer and scanner off and then on again. O Turn the devices on and off several times. The scanner can be used after the message is no longer displayed. If this message appears on the LCD panel again, contact your dealer or Epson Support. The number of held jobs has reached 200. Press the Z button and select Resume All Jobs. U"Function Summary" on page 67 169