Epson SureColor T3270 User Manual - Page 163
Replacing the Cutter
View all Epson SureColor T3270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Epson SureColor T-Series User's Guide Maintenance 3 Place the used Ink Maintenance Tank in the clear bag included with your new Ink Maintenance Tank, and make sure that the zipper is closed tight. c Important: Take care not to damage the cutter blade. Dropping it or knocking it against hard objects may chip the blade. Buttons that are used in the following settings 4 Install the new Ink Maintenance Tank. c Important: Do not touch the IC chip on the Ink Maintenance Tank. Doing so may prevent normal operation and printing. 5 Close the ink maintenance tank cover. Replacing the Cutter Replace the cutter when it is not cutting paper cleanly. Supported cutter U"Options and Consumable Products" on page 185 1 Remove any paper from the printer. U"Removing Roll paper or Roll 1" on page 34 U"Removing Cut Sheets" on page 39 U"Removing Poster Board" on page 42 2 Confirm that the printer is ready to print. Press the l/r buttons to highlight - and press the Z button. The Maintenance menu will be displayed. 3 Press the d/u buttons to select Cutter Maintenance, and then press the Z button. 4 Press the d/u buttons to highlight Replace Cutter and press the Z button. 5 The cutter will move to the replacement position. 6 Remove the old cutter from the printer. Loosen the screw holding the cutter in place using a cross-head screwdriver and pull the cutter straight out. Use a cross-head screwdriver to replace the cutter. Make sure you have a cross-head screwdriver with you before replacing the cutter. 163