Epson SureColor T3270 User Manual - Page 89

Epson SureColor T-Series User's Guide More Ways to Print In this example, Plain Paper or Singleweight Matte Paper is selected depending on the purpose of its use. The default Paper Width setting is Best Fit. If the setting has not been changed, the setting is Best Fit. U"Setup menu" on page 139 2 Open the Printer Settings tab of the printer driver and confirm that Source is Roll Auto XXXXX. XXXXX indicates the width of the roll paper currently in use. If the setting is not Roll Auto - XXXXX, click it and select Roll Auto - XXXXX. 5 Set Print Quality and other necessary settings, and then print. If a message The Media Type differs to the setting on the printer. is appears, click Ignore. Switching to Roll 1/Roll 2 by Document Size For example, when you use the following method often, if you use the settings described below, the printer can switch between Roll 1 and Roll 2 automatically in accordance with the document size of the print job. Usage example You want to switch automatically to the roll paper with the smaller margin automatically when printing drawings of various sizes including A0, A1, A2, and A3. 3 For Paper Size, select the Paper Size set in the application. In this example, select A1 594 x 841 mm. In this example, the paper is loaded as follows. The paper type is the same. Roll 1: A2 width Roll 2: A0 width Settings on Windows 1 Using the control panel of the printer, confirm Best Fit is set in Setup menu > Printer Setup > Roll Paper Setup > Roll Switch Condition > Paper Width. 89