Gateway 995 995 Series Server User Guide - Page 103
To replace a processor, end of the clip, then press down and rotate the handle of the tool
View all Gateway 995 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Installing a processor To replace a processor: 1 Install the most current BIOS version. For instructions, see "Updating the BIOS" on page 115. 2 Follow the instructions in "Preventing static electricity discharge" on page 36. 3 Remove the top rear panel and the inside panel. For instructions, see "Removing the top rear panel" on page 41 and "Removing the inside panel" on page 45. 4 If you are replacing a processor: a Insert the tip of the heat sink clip extraction tool into the slot at one end of the clip, then press down and rotate the handle of the tool toward the opposite end of the clip until the clip detaches from the heat sink. b Slide the clip toward the opposite end, then pull it away from the heat sink. c Remove the remaining clip, then remove the heat sink. Important The heat sink mounting paste may harden over time and hold the heat sink securely to the processor. If removing the heat sink also pulls the processor out of the processor socket, the processor should still be undamaged. Continue with the procedure. www.gateway.com 97