Gateway 995 995 Series Server User Guide - Page 75
of the cage., Press the tab on each side of the drive cage with a small, flat tool such
View all Gateway 995 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Installing drives 3 Remove each of the hot-swap hard drives. Make note of the slot each drive is removed from. For instructions, see "Replacing a hot-swap hard drive" on page 64. 4 Remove the top front panel. For instructions, see "Removing the top front panel" on page 43. 5 Disconnect the SCSI ribbon cable and the three power cables from the back of the cage. 6 Press the tab on each side of the drive cage with a small, flat tool such as a scribe or a flat screwdriver. www.gateway.com 69
69
Installing drives
www.gateway.com
3
Remove each of the hot-swap hard drives. Make note of the slot each drive
is removed from. For instructions, see
“Replacing a hot-swap hard drive”
on page 64
.
4
Remove the top front panel. For instructions, see
“Removing the top front
panel” on page 43
.
5
Disconnect the SCSI ribbon cable and the three power cables from the back
of the cage.
6
Press the tab on each side of the drive cage with a small, flat tool such as
a scribe or a flat screwdriver.