Gateway 995 995 Series Server User Guide - Page 122
Resetting the BIOS
View all Gateway 995 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Chapter 5: Using the BIOS Setup Utility Resetting the BIOS You can use two methods to clear all BIOS Setup settings and return them to the factory defaults: ■ Pressing the power and reset buttons on the front of the server. ■ Moving the Clear BIOS jumper on the system board. To reset the BIOS using the power and reset buttons: 1 Print the appendix for "BIOS Settings" on page 151. 2 Restart your server, then press F2 when the Gateway logo screen appears during startup. The BIOS Setup utility opens. 3 Record any custom BIOS settings on your printout. 4 Turn off the server. 5 Press the reset button and hold it down for four seconds or more, then press the power button while continuing to hold down the reset button. 6 Release both buttons at the same time. The BIOS is reset. 7 Turn on your server and restore the custom BIOS settings you recorded in Step 3. To reset the BIOS using the system board jumper: 1 Print the appendix for "BIOS Settings" on page 151. 2 Restart your server, then press F2 when the Gateway logo screen appears during startup. The BIOS Setup utility opens. 3 Record any custom BIOS settings on your printout. 4 Follow the instructions in "Preventing static electricity discharge" on page 36. 5 Turn off the server, then disconnect the power cords and all other cables connected to the server. 116 www.gateway.com