Gateway 995 995 Series Server User Guide - Page 35
Setting up paging alerts
View all Gateway 995 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Using the System Setup Utility 9 In the Connection Mode list, click either: ■ Direct Connect-The Serial RJ-45 jack on the server is connected by a serial cable to the remote system. ■ Modem Connect-The Serial RJ-45 jack on the server is connected to a modem. 10 Click Save to save the changes. 11 Click Close to return to the PEM window. Setting up paging alerts To set up paging alerts: 1 Boot your server from the Server Companion CD, then select System Setup Utility from the menu. The System Setup Utility starts. 2 Install an external modem on the serial RJ-45 jack on the back of your server. 3 In the SSU Main window, click Platform Event Manager (PEM). 4 In the PEM window, click Configure EMP. 5 In the corresponding boxes, enter the following command strings for the modem attached to the serial RJ-45 jack: ■ ESC Sequence-The escape sequence. This string is sent to the modem before sending command strings. The maximum length for the string is five characters. Longer strings are truncated. ■ Hangup String-Hang up or drop the connection. The EMP automatically sends an ENTER character following this string. The maximum length for the string is eight characters. ■ Modem Dial Command-The command to dial a phone number. This string is sent to the modem before sending the paging string. ■ Modem Init String-Initialization string for the modem. Sent every time the EMP initializes. You will be notified if the string is truncated. Following a save, the actual string saved is displayed in the edit box. www.gateway.com 29