Gateway 995 995 Series Server User Guide - Page 49
Removing the top front panel
View all Gateway 995 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Opening the server case Removing the top front panel Remove the top front panel to access these components: ■ Hot-swap hard drive cage ■ Hot-swap power supply cage ■ Tape drive ■ CD and diskette drives ■ Front panel board Warning For correct cooling, always install all panels before running the server for an extended time. Operating the server for longer than five minutes without the panels in place can overheat and damage the server. To remove the top front panel: 1 Follow the instructions in "Preventing static electricity discharge" on page 36. Make sure that you turn off the server, then unplug the power cords and all other cables connected to the server. Warning This server has two power cords. To disconnect internal AC power, you must unplug both power cords. 2 Remove the front cover, if installed. For instructions, see "Using the front cover" on page 39. www.gateway.com 43