Gateway 995 995 Series Server User Guide - Page 57
Adding a redundant power supply
![]() |
View all Gateway 995 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Installing power supply components Adding a redundant power supply To add a third (redundant) power supply: 1 Remove the front cover, if installed. For instructions, see "Using the front cover" on page 39. 2 Remove the screw that secures the redundant slot's cover to the server, then remove the slot cover. Screw 3 Insert the new power supply into the vacant slot, then press it all the way in until it clicks into place. 4 If you have added a third power supply to the server for the first time, you must run the FRU/SDR utility for the server to use it as a redundant power supply. For instructions on running the FRU/SDR utility, see "Using the FRU/SDR Load utility" on page 26. www.gateway.com 51
![](/manual_guide/products/gateway-computers-995-995-series-server-user-guide-d203082/57.png)
51
Installing power supply components
www.gateway.com
Adding a redundant power supply
To add a third (redundant) power supply:
1
Remove the front cover, if installed. For instructions, see
“Using the front
cover” on page 39
.
2
Remove the screw that secures the redundant slot’s cover to the server, then
remove the slot cover.
3
Insert the new power supply into the vacant slot, then press it all the way
in until it clicks into place.
4
If you have added a third power supply to the server for the first time,
you must run the FRU/SDR utility for the server to use it as a redundant
power supply. For instructions on running the FRU/SDR utility, see
“Using
the FRU/SDR Load utility” on page 26
.
Screw