Gateway 995 995 Series Server User Guide - Page 144
BIOS, CD drive
View all Gateway 995 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Chapter 6: Troubleshooting Code 8503: Error message Expansion ROM not initialized Invalid System Configuration Data System Configuration Data Read Error Resource Conflict System Configuration Data Write error Warning: IRQ not configured Incorrect memory speed in location: XX, XX, ... Failure description PCI Expansion ROM card not initialized System configuration data destroyed System configuration data read error PCI card resource is not mapped correctly System configuration data write error PCI interrupt is not configured correctly Non-PC200 DIMMs have been installed in slots XX, XX, ... BIOS The settings in the BIOS Setup utility are not retained ■ Replace the CMOS battery. For instructions, see "Replacing the CMOS battery" on page 102. CD drive Your server does not recognize a CD or the CD drive ■ Restart your server, then open the BIOS Setup utility by pressing and holding F2 while your server restarts. Make sure that the IDE controllers are enabled. For more information, see "Using the BIOS Setup Utility" on page 113. ■ Reinstall the device driver. For instructions, see Using Your Server Companion CD. ■ Make sure that the drive is configured correctly by following the instructions in the drive's documentation. 138 www.gateway.com