Gateway 995 995 Series Server User Guide - Page 89
the card is a full-length card, make sure that the end of the card slides into
View all Gateway 995 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Installing expansion cards 3 Press down on the expansion card's locking clip, then rotate the clip up and out of the way. 4 Disconnect any cables attached to the card. 5 Remove the card from the server. 6 Insert the new card into the same slot you removed the old card from. If the card is a full-length card, make sure that the end of the card slides into the full-length card guide next to the fan cage. www.gateway.com 83
83
Installing expansion cards
www.gateway.com
3
Press down on the expansion card’s locking clip, then rotate the clip up
and out of the way.
4
Disconnect any cables attached to the card.
5
Remove the card from the server.
6
Insert the new card into the same slot you removed the old card from. If
the card is a full-length card, make sure that the end of the card slides into
the full-length card guide next to the fan cage.