Gateway 995 995 Series Server User Guide - Page 82
press the drive down onto the bracket until it snaps into place.
View all Gateway 995 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Chapter 4: Installing Components 3 Remove the CD drive from the bracket by pulling the side nearest the screw hole. Screw hole 4 Insert the new CD drive onto the bracket so the screw holes on the upper left edge of the drive line up with the alignment pins on the bracket, then press the drive down onto the bracket until it snaps into place. Screw hole Alignment pin 5 Reinstall the media drive bracket into the server. For instructions, see "Replacing the media drive bracket" on page 74. 76 www.gateway.com
76
Chapter 4: Installing Components
www.gateway.com
3
Remove the CD drive from the bracket by pulling the side nearest the screw
hole.
4
Insert the new CD drive onto the bracket so the screw holes on the upper
left edge of the drive line up with the alignment pins on the bracket, then
press the drive down onto the bracket until it snaps into place.
5
Reinstall the media drive bracket into the server. For instructions, see
“Replacing the media drive bracket” on page 74
.
Screw hole
Screw hole
Alignment pin