Gateway 995 995 Series Server User Guide - Page 51
Removing the inside panel
View all Gateway 995 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Opening the server case Removing the inside panel Remove the inside panel to access these components: ■ Memory board and memory modules ■ Processor board and processors ■ Standard PCI cards and card slots ■ System board Warning For correct cooling, always install all panels before running the server for an extended time. Operating the server for longer than five minutes without the panels in place can overheat and damage the server. To remove the inside panel: 1 Follow the instructions in "Preventing static electricity discharge" on page 36. Make sure that you turn off the server, then unplug the power cords and all other cables connected to the server. Warning This server has two power cords. To disconnect internal AC power, you must unplug both power cords. 2 Remove the top rear panel. For instructions, see "Removing the top rear panel" on page 41. www.gateway.com 45