Gateway 995 995 Series Server User Guide - Page 81
Replacing the CD drive
![]() |
View all Gateway 995 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
7 Pull the bracket out of the server toward the front. Installing drives 8 Insert the new bracket into the server, then reinstall the screw. 9 Reconnect the power and data cables to the bracket, then reinstall the fan cage and fans. 10 Reinstall the top front and top rear panels. Replacing the CD drive Warning The drives in the media drive bracket are not hot-swappable. Before removing the bracket, make sure that the server is turned off and power cords are unplugged. To replace the CD drive: 1 Follow the instructions in "Preventing static electricity discharge" on page 36. Make sure that you turn off the server, then unplug the power cords and all other cables connected to the server. 2 Remove the media drive bracket. For instructions, see "Replacing the media drive bracket" on page 74. www.gateway.com 75
![](/manual_guide/products/gateway-computers-995-995-series-server-user-guide-d203082/81.png)