HP 750c Service Manual - Page 170
Pinchwheel Sensor
View all HP 750c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
31. Pinchwheel Sensor The purpose of this test is to verify the operation of the pinchwheel sensor. Perform the pinchwheel sensor test as follows: 1 In the Service Tests submenu, scroll to 31 Pinchwheel Sensor" and press Enter. SERVICE TESTS 31 Pinchwheel sensor 2 If the pinchwheel lever is lowered then the Pinchwheels Down / Stop..." message is displayed on the frontĆpanel. Press the Down Arrow button to stop the test. 3 If the pinchwheel lever is raised then the Pinchwheels Up / Stop..." message is displayed on the frontĆpanel. Press the Down Arrow button to stop the test. If the pinchwheel lever is raised when the Pinchwheel Down / Stop..." message is displayed on the frontĆpanel, then the test has failed. If the pinchwheel lever is lowered when the Pinchwheel Up / Stop..." message is displayed on the frontĆpanel, then the test has failed. If the test fails, try replacing one of the following components: 1 Pinchwheel sensor ' page 6Ć21. 2 PinchĆarm assembly ' page 6Ć57. 3 Main PCA ' page 6Ć9. Only replace one component at a time and perform the "Pinchwheel Sensor" test again before replacing another component. Using this procedure you will be able to determine exactly which component failed. 8-52 Troubleshooting C4705-90000