HP 750c Service Manual - Page 89

9 Remove the trailingĆcable guide clip by pressing out its legs. 10 Gently force apart one corner of the guide and the trailing cable. This will release the cable from the retaining mechanism at that corner. Repeat for the other three corners. In order to access the trailing cable behind the electronics enclosure, perform the following steps: 11 Remove the screw that attaches the trailing cable holder to the chassis. 12 Disconnect the following cables from the Main PCA: frontĆpanel cable, XĆaxis motor encoderĆcable, trailing cable, pinchĆwheel sensor and media sensor cables, and XĆaxis motor and YĆaxis motor cables. 13 Remove the two upper screws that attach the electronics enclosure to the sideplates from both the right and left sides, and loosen the two bottom screws. Swing the electronics enclosure outwards on its hinges. Release the trailing cable passing it through the ferrites. C4705-90000 Removal and Replacement 6-37