HP 750c Service Manual - Page 91

Reinstalling the Trailing Cable Reinstall the trailing cable following the previous steps in the reverse sequence. After reinstalling, two adjustments are required to ensure correct functionality: LENGTH ADJUSTMENT 1 Move the carriage to the maximum rightĆend position (interacting with the YĆaxis motor holder). 2 Release the trailingĆcable clip on the carriage, and adjust the length of the trailing cable to avoid interaction with the YĆaxis motor holder. The minimum distance between the trailing cable and the holder should be 0.5 cm. ANGULAR ADJUSTMENT 1 Loosen the screw that attaches the lower trailingĆcable holder to the chassis. 2 Perform the angular adjustment to align the trailing cable with the slider rods and belt. C4705-90000 Removal and Replacement 6-39