HP Carrier-grade cc3300 User Information and Service Guide - HP Carrier-Grade - Page 45
Configuration Software and Utilities
View all HP Carrier-grade cc3300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
5 Configuration Software and Utilities System Software Update Sequence When updating the system software, you should do it in the following order: 1. Update firmware (BMC and hot-swap controller) 2. Update FRU/SDR 3. Unplug the server for 30 seconds 4. Update BIOS 5. Clear CMOS Server Configuration Wizard The server configuration wizard is a utility that is provided to help you configure your server. The server configuration wizard is located on the HP Server cc3310 User Information Diagnostics and Utilities Resource CD shipped with the server and runs automatically when you boot your server to this CD. The server configuration wizard includes a help system that can be accessed by clicking the Help button. Run the server configuration wizard to: • Create or update a service partition and install service partition files, including files that are necessary to run the system setup utility • Load FRUs and SDRs • Set the system asset tag • Set server management settings, including an IP address, Emergency Management Port (EMP) settings, Platform Event Paging (PEP) settings, and LAN/Alert settings • Execute utility applications that can be used to manually configure the server When first executed, the server configuration wizard probes the server for installed devices, firmware, chassis information, hard disks, and other relevant data. This information is used to determine what questions the application needs to ask you to complete the configuration. When you select the option server configuration wizard > run wizard, you will be shown a selection window allowing you to choose the items you want to configure. You can select one or more options to configure at the same time. Some options have dependencies that make you select multiple options. These are: • If you select Configure this server for LAN Alerting, the option for Configure this server for remote Server Management over a LAN connection will automatically be selected. • If you select Configure this server for Serial/Modem alerting, the option for Configure this server for remote Server Management over a Serial/Modem connection will automatically be selected. In addition, you can select only one of the following at a time: • Load SDRs only onto this server or • Load FRUs and SDRs onto this server Chapter 5 45