HP Carrier-grade cc3300 User Information and Service Guide - HP Carrier-Grade - Page 93
Replacing CD-ROM OR CD+RW/DVD Drives
View all HP Carrier-grade cc3300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
The hard drive bays are designed to accept 15,000 RPM (and below) hard drives that consume up to 18 Watts of power. Figure 11-3. Hard Drive Bays 1 2 TP130 Hard Drive Tray Each hard drive used in the server must be mounted to a drive tray using four screws inserted into the bottom of the drive as shown in Figure 11-4. Figure 11-4. Hard Drive Tray TP131 Replacing CD-ROM OR CD+RW/DVD Drives The peripheral bay supports either CD-ROM or CD+RW/DVD drive carrier assembly. These items are supplied in carrier assemblies that can be inserted into the server. The blind-mate carrier assembly can be inserted or removed when server power is off. After the drive carrier assembly is installed into the server, a horizontal handle is used to secure it to the chassis. CAUTION CD-ROM, and CD+RW/DVD drives are not hot-swappable. Serious damage can result if the drive is removed when the server is powered on. NOTE Disconnect power from server before replacing the CD-ROM drives. Chapter 9 93